Enduro S3802 LLU MAX - Stainless Steel, MAX-Design, Double Row, ABEC-3, radial suspension bearing -15mm x 24mm x 7mm

S3802 LLU MAX - Stainless Steel, MAX-Design, Double Row, ABEC-3, radial suspension bearing -15mm x 24mm x 7mm

Regular price$40.96
/
Shipping calculated at checkout.

  • In stock, ready to ship
  • Inventory on the way

S3802 LLU MAX - Stainless Steel, MAX-Design, Double Row, ABEC-3, radial suspension bearing - 15mm x 24mm x 7mm -

Enduro Bearings pioneered MAX type bearings over 20 years ago for bicycles to address the challenges associated with mountain bike pivots. MAX bearings provide 35-40% more load capacity than standard radial bearings by employing with a special design where the maximum number of balls (full-complement) are inserted into the bearing, via a custom ground slot in the races. The race grooves are also deeper on these bearings to provide increased lateral support to counteract the twisting and multi-directional forces associated with mountain bike pivots.

Not all stainless steel is created equal.
Enduro only uses 440C stainless steel balls and races to provide long life and superior corrosion resistance in applications and environments that may be less than ideal. 440C has the highest strength, hardness, and wear resistance of all the standard 440-series stainless alloys with high carbon content. As you might expect, it is also the most expensive of the 440 series alloys and requires multiple rounds of heat treatment and cryogenic treatment to achieve its superior mechanical properties. Though stainless steel has 20% less load capacity and is slightly softer than our standard 52100 chromium steel used in most of our bearings, stainless steel is an excellent alternative for use in wet conditions, if you wash your bike often, or where sweat can be a problem.

This ABEC-3 bearing features deep-groove design races, with Grade 10 balls and full-contact, double-lip, labyrinth (LLU) seals for maximum protection against the elements, while keeping the 90% fill of Almagard extra high pressure grease inside. The double-row design greatly reduces flex in the suspension linkage while doubling the bearing contact area.

This bearing has been used as a suspension pivot bearing by Pivot and Santa Cruz bikes, and is commonly identified in the industry by the part number HNA000BA00.

The Enduro line of bearings are available in high-carbon chromium steel, 440C stainless steel, ceramic-hybrid and XD-15 with ceramic or stainless balls. Our bearings are always engineered with deepest groove races possible to accommodate the largest balls and feature dual-lip seals that ride in a micro-groove creating a full labyrinth to provide superior protection against the elements.

Static load - 940lbf / 4.17kN
Weight - 10.51g

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.


Recently viewed